The JIS G3444 (STK) and JIS G3466 (STKR) standards are both Japanese Industrial Standards (JIS) for carbon steel tubes, but they differ in terms of application, mechanical properties, and intended use. Below is a detailed comparison:

Shape
JIS G3444: Primarily covers round tubes.
JIS G3466: Covers square and rectangular tubes. Additionally, JIS G3466 includes provisions for the use of steel grades other than carbon steel, such as high-strength low-alloy and weather-resistant steel.
Application
JIS G3444: This standard specifies carbon steel tubes for general structural purposes. It is commonly used in building construction, bridges, and other structural applications.
JIS G3466: This standard specifically covers square and rectangular steel tubes used for general structural purposes.

JIS G 3444 (STK) – Carbon Steel Tubes for General Structure
Scope:
This standard specifies carbon steel tubes used primarily for general structural applications, such as construction, machinery, and other non-pressure purposes.
These tubes are not intended for high-pressure or high-temperature service.
Material & Grades:
Made from carbon steel (low to medium carbon content).
Common grades: STK290, STK400, STK490, STK500, STK540 (numbers indicate minimum tensile strength in MPa).
Manufacturing Methods:
Produced via seamless (S), electric resistance welding (E), butt welding (B), and automatic arc welding (A).
Key Features:
- Moderate strength and good weldability.
- Used in building frames, scaffolding, guardrails, and general machinery parts.
- Not suitable for fluid transport under pressure.

JIS G 3466 (STKR) – Carbon Steel square and rectangular Tubes for general Structure
Scope:
This standard covers carbon steel tubes specifically designed for machine structural components, requiring higher precision and strength than STK tubes.
Often used in automotive, industrial machinery, and high-stress applications.
Material & Grades:
Higher-quality carbon steel with stricter chemical composition control.
Common grades: STKR400, STKR490.
Manufacturing Methods:
Primarily seamless (SMLS) or cold-drawn welded tubes for better dimensional accuracy and surface finish.
Key Features:
Higher strength and toughness compared to STK tubes.
Tighter dimensional tolerances for precision machinery parts.
Used in shafts, cylinders, gears, and other load-bearing components.
