Impact Test

Mar 17, 2025

Leave a message

Definition and method of steel tube impact test
Impact test is a test method to evaluate the toughness and brittle fracture resistance of the material by applying instantaneous impact load to the standard notched sample and measuring the energy absorption ability of the material.
1. Test principle:
• Use a pendulum impact machine to strike a notched specimen (such as Charpy V or U notch) at one time, by measuring the height difference before and after the pendulum impact, calculate the work absorbed by the specimen when it breaks (that is, the impact absorption work Ak, in joules).
• The higher the impact absorption work, the better the toughness of the material and the stronger the impact resistance.

 

2. Test method:
• Sample requirements: Standard dimensions are 55mm long, 10mm×10mm cross-section, notch types include V (more sensitive) and U (lower stress concentration).
• Equipment: Charpy pendulum impact testing machine, manual or automatic operation.

 

 

The impact of different temperatures on the impact test
Temperature is a key factor affecting the impact performance of steel pipes, and the specific differences are reflected in the following aspects:
1. Tough-brittle transition temperature (DBTT) :
• Within a certain temperature range, the impact absorption work of steel will decrease significantly, and the material will change from ductile fracture (the fracture is plastic deformation) to brittle fracture (the fracture is flat), which is called the tough-brittle transition temperature.
• For example: Q355B steel pipe is divided into different grades, B (20℃), C (0℃), D (-20℃), E (-40℃) impact test, corresponding to the use of different low temperature environment needs.

 

2. Low temperature impact characteristics:
• Cold brittleness phenomenon: steel absorbs work sharply at low temperatures and is prone to brittle fracture (such as Bridges and ships are prone to cracking in cold areas).
• Test conditions:
◦ Low temperature impact The sample should be pre-cooled in a coolant (such as liquid nitrogen + alcohol) to the target temperature (such as below -60 ° C), and the degree of supercooling should be strictly controlled (such as 3 to 4 ° C for -100 ° C).
◦ The test temperature range usually covers -192 ° C to room temperature to simulate extreme environments.

 

3. High temperature impact characteristics:
• Steel toughness is better at high temperatures, but the hardness and strength may decrease (such as the softening of the steel structure in a fire).

 

 

Significance and application of impact test
1. Quality control:
• Detect material internal defects (such as inclusions, pores), grain size and heat treatment effect to avoid substandard performance due to process problems.

2. Safety assessment:
• Guide engineering material selection: for example, steel with low DBTT (such as Q355D/E) should be selected in cold areas to avoid the risk of brittle fracture.
• Dynamic load scenario verification: For example, Bridges and pressure vessels need to verify their anti-fatigue and anti-impact capabilities through impact tests.

3. Material development and optimization:
Analysis of the influence of alloying elements: such as molybdenum (Mo) can inhibit low temperature brittleness, nickel (Ni) to improve toughness, chromium (Cr) to enhance corrosion resistance.
• Promote the development of standards: for example, the "Charpy pendulum Impact Test Method for Metal Materials" (GB/T 229) regulates the test process.

 

 

Summary
The impact test of steel pipe quantifies the energy absorption capacity of the material under dynamic load, which provides the core basis for engineering safety, material selection and process optimization. The influence of temperature on the test results is significant, especially the toughness and brittleness transition characteristics at low temperature should be paid attention to. In practical application, test methods and evaluation criteria should be selected according to specific working conditions (such as temperature and load type).

Send Inquiry