EN 10210 S355J2H Square Hot Finish Hollow Section Specification
Standard : BS EN10210 Hot finished structural hollow sections of non-alloy and fine grain steels
Grade : S355J2H
SHS (Square Hollow Sections) Sizes : 200*200mm-1200*1200mm
Wall Thickness : 4.0mm - 50mm
Length : 1000-24000 mm
Type : Seamless/ Welded / ERW / LSAW
Dimensional Tolerances : Thickness : (All sizes +/- 10%)
Dimension Range : 140MM--3084MM
Packing : In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark
Surface Protection : Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized
Brand: LEFIN STEEL
Shipment: BULK VESSEL SHIPMENT & CONTAINER SHIPMENT
Contact: ericli@lefinsteel.com 008615122229899
EN 10210 S355J2H Hot Finish Square Hollow Section Chemical Composition
| Steel Grade | % by mass maximum | |||||||
| Steel Name | Steel Number | C specified thickness (mm) | Si | Mn | P | S | N | |
| <_40 | > 40 <_ 120 | |||||||
| S355J2H | 1.0576 | 0.22 | 0.22 | 0.55 | 1.60 | 0.030 | 0.030 | - |
EN 10210 Hot Finish S355J2H Structural Square Hollow Section Mechanical Properties
| Steel Grade | Minimum yield strength eH Mpa | Minimum tensile strength Rm Mpa | ||||||||
| Steel Name | Steel Number | Specified thickness in mm | Specified thickness in mm | |||||||
| <_16 | >16 <_40 | >40 <_63 | >63 <_ 80 | >80 <_100 | >100 <_120 | <_3 | >3 <_100 | >100 <_ 120 | ||
| S355J2H | 1.0576 | 355 | 345 | 335 | 325 | 315 | 295 | 510-680 | 470-630 | 450-600 |
