EN10210 S355J2H STEEL PIPES

Send Inquiry
EN10210 S355J2H STEEL PIPES
Details
EN10210 S355J2H is a kind of hot-formed structural steel pipe widely used in European standards, featuring high strength, good toughness and welding performance. The following is a detailed introduction to this material from multiple dimensions: Standard and Grade analysis Standard EN10210:...
Category
Hollow Section
Share to
Description

Tianjin Lefin Industrial Co., Ltd is one of the most experienced manufacturers and suppliers of en10210 s355j2h steel pipes in China. Please feel free to buy high quality en10210 s355j2h steel pipes from our factory. Good service and reasonable price are available.

 

EN10210 S355J2H is a kind of hot-formed structural steel pipe widely used in European standards, featuring high strength, good toughness and welding performance. The following is a detailed introduction to this material from multiple dimensions:

Standard and Grade analysis

Standard EN10210: European Standard for hot-formed hollow Sections of non-alloy and fine-grained structural steel, covering manufacturing requirements, chemical composition, mechanical properties and testing methods.

The meaning of S355J2H 

S: Structural Steel.

355: The minimum yield strength is 355 MPa.

J2: Impact toughness grade, with a minimum impact energy of 27J at -20℃.

H: Hollow Section.

Chemical composition (typical range)

Element content range (%) function
C ≤0.22 controls strength and weldability
Mn ≤1.60 enhances strength and hardenability
Si ≤0.55 deoxidizer, enhancing strength
P ≤0.035 Impurities (the lower, the better)
S ≤0.035 Impurities (controlling the form of sulfides)
Nb/V/Ti microalloying refines grains and enhances toughness

Mechanical performance

Yield strength (Rp0.2) : ≥355 MPa.

Tensile strength (Rm) : 470-630 MPa.

Elongation (A5) : ≥22% (for circular pipes with a thickness of ≤16mm) or ≥17% (for rectangular pipes).

Impact toughness (-20℃) : ≥27J (Charpy V-notch test).

Manufacturing process

Hot forming: Formed through hot rolling or hot extrusion processes, followed by normalizing treatment (to improve the uniformity of the structure).

Size range: It covers circular, square and rectangular cross-sections, with wall thickness typically ranging from 3 to 120mm and outer diameter up to 1200mm.

Application field

Building structure: gymnasium, high-rise building frame, bridge support.

Mechanical engineering: Crane booms, agricultural machinery frames.

Infrastructure: Offshore platforms, wind power towers.

Advantages: High strength-to-weight ratio, resistance to low-temperature impact, and easy to weld and process.

Processing and Welding

Welding: It is recommended to use low-hydrogen electrodes (such as E7018), and preheat to 100-150℃ (temperature control is required for thick-walled pipes).

Cold bending: Cold bending processing is allowed, but the bending radius needs to be controlled to avoid cracking.

Cutting: Applicable to flame cutting, plasma cutting or laser cutting. The cut surface needs to be ground to remove the heat-affected zone.

EN 10210 S275J2H HOLLOW SECTION

Quality inspection

Chemical analysis: The spectrometer detects whether the components meet the standards.

Mechanical testing: Tensile and impact tests verify strength and toughness.

Non-destructive testing: Ultrasonic or eddy current testing for internal defects.

Dimensional inspection: Control of wall thickness, outer diameter, and ellipticity tolerance.

Precautions

Standard update: Please refer to the latest versions of EN10210-1:2006 and EN10210-2:2006.

Environmental adaptability: Suitable for low-temperature environments, but when the temperature drops below -20℃, higher toughness grades (such as S355K2H) should be selected.

EN10210 S355J2H steel pipe has become one of the preferred materials in the European engineering field due to its balanced performance. In practical applications, it is necessary to combine design specifications and processing conditions to ensure the maximization of material performance.

The application of EN10210 S355J2H steel pipe

 

EN10210 S355J2H steel pipe, with its high strength, good low-temperature toughness and welding performance, is widely used in the following fields:

  • Architecture and infrastructure

Steel structure buildings: high-rise building frames, roofs of large sports venues, and supporting structures of exhibition centers (such as the London Olympic Stadium).

 

Bridge engineering: main beams of suspension Bridges, chord members and support columns of truss Bridges (which need to bear dynamic loads).

 

Offshore platform: The low-temperature toughness requirements for the jacket and anti-icing structures of offshore oil platforms.

  • Heavy machinery and transportation

Lifting equipment: crane boom, tower crane body (requiring high strength and fatigue resistance).

 

Agricultural machinery: combine harvester frames, heavy-duty trailer chassis.

 

Rail transit: Metro car underframe, freight train car connection components.

  • Energy and Environmental Protection

Wind power generation: Internal support structure of the tower (which needs to withstand low-temperature impact, especially in high-altitude or cold regions).

 

Gas transmission pipeline: Medium and high-pressure gas transmission pipeline (must meet the welding quality and anti-brittle fracture performance).

  • Special environment

Facilities in low-temperature areas: Arctic research stations, transmission towers in cold regions (remaining resilient in an environment of -20℃).

 

EN 10210 S355J0H CIRCULAR HOLLOW SECTION

 

Hot Tags: en10210 s355j2h steel pipes, China, suppliers, manufacturers, factory, price, Steel Rectangle Tube, STKR490 Square Hollow Section, EN10219 Rectangle Hollow Section, EN10219 S275JR Structural Steel Hollow Section, S235JR 400x400 Square Pipe, Square Hollow Section

Send Inquiry