ASTM A500 PIPE

Tianjin Lefin Industrial Co., Ltd is one of the most experienced manufacturers and suppliers of astm a500 pipe in China. Please feel free to buy high quality astm a500 pipe from our factory. Good service and reasonable price are available.

ASTM A500 is a widely used standard for cold-formed welded and seamless carbon structural steel pipes, especially suitable for structural fields such as construction and Bridges. The following is a detailed explanation from aspects such as advantages, technical requirements, steel grade classification, application scenarios, selection methods, and differences from ASTM A501:

High structural strength

The cold forming process is adopted to enhance the yield strength and tensile strength of the material, making it suitable for load-bearing structures.

High dimensional accuracy

The tolerance of outer diameter and wall thickness is strictly controlled (such as the deviation of outer diameter ≤0.5% to 0.75%) to ensure installation compatibility.

Diversified specifications

It covers circular, square, rectangular and irregular cross-sections, with the maximum external dimension reaching 1,626mm, and is suitable for complex designs.

Good economy

Compared with Tube products (such as ASTM A450), Pipe has higher production efficiency and lower cost.

Manufacturing process

Optional welding (resistance welding) or seamless process is available. For welded pipes, the strength of the weld seam must be guaranteed.

Chemical composition

Separate furnace analysis and product analysis are carried out, with strict control over elements such as carbon (C≤0.26%), manganese (Mn≤1.35%), phosphorus (P≤0.035%), and sulfur (S≤0.035%).

Mechanical performance

Tensile strength and yield strength are classified by steel grade (see the table below);

The elongation is required to be calculated based on the wall thickness (for example, when the wall thickness is ≤3.05mm, the elongation =56t+17.5).

Test requirements

Flattening test: To detect the ductility of the weld seam and the integrity of the pipe body;

Dimensional tolerance: The outer diameter, wall thickness, straightness, etc. must comply with strict standards (for example, the Angle tolerance between adjacent surfaces of a rectangular tube should be ≤2°).

Comparison of mechanical properties of ASTM A500 steel grade:
 

Building structure: stair railings, roof trusses, columns

Bridge engineering: Auxiliary support structure

Mechanical manufacturing: Conveyor system supports, equipment frames

Traffic facilities: Street lamp poles, traffic sign poles.

Grade A/B: Conventional building structures (such as shopping mall brackets, warehouse frames), with high cost performance;

Class C: Heavy machinery or high-stress components (such as crane booms);

Grade D: In low-temperature environments (such as Bridges in cold regions) or dynamic load scenarios, it is necessary to ensure impact resistance.

ASTM A501 is a thermoformed structural tube. The main differences from A500 are as follows:

Comparison of core differences between ASTM A500 and A501

Note: A501 is currently used less frequently, while A500 has become mainstream due to its advantages in cost performance and strength.

ASTM A500 has become the preferred pipe material in the fields of construction and machinery due to its high precision, strong structural strength and economy.

The selection of steel grades should take into account the load, environment (such as low temperature) and cost. Grade B or C should be given priority.

Compared with A501, A500 has more advantages in terms of strength, cost and application breadth, especially being irreplaceable in the main load-bearing structure.

It is recommended to give priority to referring to the ASTM A500 standard during the design, and strictly verify the weld quality and low-temperature toughness (if grade D is selected).