AISI 1117 Carbon Steel Pipe

Send Inquiry
AISI 1117 Carbon Steel Pipe
Details
Carbon is the main alloying element found in carbon steels. Chromium, nickel, copper, molybdenum, and aluminium are present in small quantities. These steels contain 0.4% of silicon and 1.2% of manganese. AISI 1117 carbon steel contains more manganese than other lower-carbon steels in order to ensure good hardenability.
Category
Hollow Section
Share to
Description

Tianjin Lefin Industrial Co., Ltd is one of the most experienced manufacturers and suppliers of aisi 1117 carbon steel pipe in China. Please feel free to buy high quality aisi 1117 carbon steel pipe from our factory. Good service and reasonable price are available.

 

Material Overview

AISI 1117 is a low-carbon, free-machining steel classified under the American Iron and Steel Institute (AISI) standards. It contains added sulfur and phosphorus to improve machinability, making it suitable for precision parts and piping applications requiring extensive machining.

 

Chemical Composition

The typical chemical composition of AISI 1117 steel is:

 

Element Content (%)
Iron, Fe 98.33 - 98.78
Manganese, Mn 1.0 - 1.30
Carbon, C 0.14 - 0.20
Sulfur, S 0.080 - 0.13
Phosphorous, P 0.040
  • Manganese (Mn): 1.00–1.30% (enhances strength and hardenability)
  • Carbon (C): 0.14–0.20% (low carbon content for good weldability and formability)
  • Sulfur (S): 0.08–0.13% (increases machinability by forming MnS inclusions)
  • Phosphorus (P): ≤ 0.040% (improves machinability but may reduce ductility)
  • Iron (Fe): Balance
  • The increased sulfur content enhances machinability but may reduce weldability and impact toughness.

 

Mechanical Properties

The mechanical properties of AISI 1117 carbon steel are outlined in the following table.

Properties Metric Imperial
Tensile strength 475 MPa 68900 psi
Yield strength 400 MPa 58000 psi
Bulk modulus (typical for steel) 140 GPa 20300 ksi
Shear modulus (typical for steel) 80.0 GPa 11600 ksi
Elastic modulus 190-210 GPa 27557-30458 ksi
Poisson's ratio 0.27-0.30 0.27-0.30
Elongation at break (in 50 mm) 15% 15%
Reduction of area 40% 40%
Hardness, Brinell 137 137
Hardness, Knoop (converted from Brinell hardness) 156 156
Hardness, Rockwell B (converted from Brinell hardness) 75 75
Hardness, Vickers (converted from Brinell hardness) 143 143

 

ERW PIPES

 

Common Applications

AISI 1117 steel pipes are used in:

  • Shafts, pins, and fasteners (machined components)
  • Hydraulic systems and low-pressure fluid transport
  • Automotive non-critical parts (bushings, spacers)
  • General machinery and tooling components

 

Fabrication And Weldability

Machining: Excellent due to sulfur inclusions.

Welding: Not recommended for critical welds (sulfur causes hot cracking). If welding is necessary, preheating and low-hydrogen electrodes are advised.

Cold Working: Suitable for bending and forming.

 

Manufacturing and Standards

Pipe Types: Seamless or welded (ERW/electric resistance welded).

Standards: ASTM A53 (general pipe standards), ASTM A106 (high-temperature service), ASTM A519 (seamless mechanical tubing), G11170(UNS), or custom machining specifications.

Surface Treatment: Often supplied as-drawn, turned, or with protective coatings (e.g., oil, zinc plating).

 

 

Advantages and Limitations

Pros: Cost-effective, easy to machine, readily available.

Cons: Lower corrosion resistance (requires coatings), limited strength for high-load applications.

 

Conclusion

AISI 1117 carbon steel pipes are cost-effective for machining-focused applications but are limited in weldability and strength compared to higher-grade steels. They are best suited for components where ease of fabrication outweighs the need for structural robustness.

 

WELDED STEEL PIPE

 

welded steel pipes

 

Hot Tags: aisi 1117 carbon steel pipe, China, suppliers, manufacturers, factory, price, ASTM A500 GR B STEEL TUBE, Saudi Arabia S355J2H SHS RHS Steel, HOT FINISH HOLLOW SECTION, EN10210 S355J2H SQUARE TUBE, Rectangle Pipe, S355J2H STEEL HOLLOW SECTIONS

Send Inquiry