AS 3679 Grade300

Send Inquiry
AS 3679 Grade300
Details
Standard: AS 3679 (Australian Standard for Structural Steel)
Grade: 300
The standard applies to carbon and carbon-manganese steels
supplied in the following forms:
Hot-rolled plates, sheets, and strips
Hot-rolled structural sections (e.g., beams, channels, angles)
Bars for structural use
It does not cover cold-formed steel (which falls under AS 1163) or stainless steel.
Category
Hollow Section
Share to
Description

Tianjin Lefin Industrial Co., Ltd is one of the most experienced manufacturers and suppliers of as 3679 grade300 in China. Please feel free to buy high quality as 3679 grade300 from our factory. Good service and reasonable price are available.

 

AS 3679 Grade 300 is a structural steel grade commonly used in construction and engineering applications in Australia. It is part of the AS 3679 standard, which specifies the requirements for hot-rolled structural steel plates, floorplates, and bars.

Key Properties and Chemical Composition (Typical)

Key Properties

The mechanical properties of AS 3679 Grade 300 are designed to meet the demands of structural applications:

  • Yield Strength: Minimum 300 MPa
  • Tensile Strength: Minimum 440 MPa
  • Elongation: Minimum 22% (depending on the thickness and type of steel section)

 

Chemical Composition (Typical) 

The chemical composition of AS 3679 Grade 300 is strictly controlled to ensure consistent mechanical properties. The maximum content of key elements is as follows:

  • Carbon (C): 0.25%
  • Silicon (Si): 0.5%
  • Manganese (Mn): 1.6%
  • Phosphorus (P): 0.04%
  • Sulfur (S): 0.04%
  • Other Elements: Trace amounts of aluminum, niobium, or vanadium may be added for grain refinement.

 

h beam and i beam

 

Processing and Fabrication

Weldability

  • Good weldability due to low carbon content.
  • Preheating required if:

Thickness > 25–30 mm (to avoid hydrogen cracking).

Ambient temperature < 5°C.

  • Recommended Welding Methods:

SMAW (Stick), GMAW (MIG), FCAW (Flux-Cored), SAW (Submerged Arc).

 

Machining & Forming

  • Machinability Rating: ~60% (compared to free-cutting steel).
  • Bendability: Minimum bend radius ~1.5× thickness (for 90° cold bending).

 

Heat Treatment (If Required)

  • Hot Rolled: The steel is delivered in its as-rolled condition without additional heat treatment.
  • Normalized: The steel may be normalized to refine the grain structure and improve mechanical properties. This process involves heating the steel to a specific temperature and then cooling it slowly in air.

 

h beam

 

Certification and Testing

To ensure compliance with AS/NZS 3679.1, Grade 300 steel undergoes rigorous testing

  • Chemical Analysis: To verify the chemical composition.
  • Mechanical Testing: Tensile and impact tests to confirm strength and toughness.
  • Dimensional and Visual Inspection: To ensure the steel meets specified dimensions and is free from defects.

 

applications

Grade 300 steel is suitable for a wide range of applications due to its balanced strength and ductility

  • Construction: Used in building structures, bridges, and infrastructure projects.
  • Transportation: Commonly used in railway tracks, vehicle components, and other transportation-related applications.
  • Mechanical Testing: Tensile and impact tests to confirm strength and toughness.

 

In summary, AS/NZS 3679 Grade 300 steel is a versatile and reliable material suitable for a wide range of structural applications. Its balanced mechanical properties and strict quality control make it a preferred choice in the Australian and New Zealand markets. 

H2

 

Hot Tags: as 3679 grade300, China, suppliers, manufacturers, factory, price, S355J2H STEEL HOLLOW SECTIONS, SQUARE TUBE HOLLOW SECTION, Singapore Hollow Section Tube, A1085 Hollow Structural Section HSS, Square Tube Metal, Square Steel Tube

Send Inquiry