Tianjin Lefin Industrial Co., Ltd is one of the most experienced manufacturers and suppliers of jis g3444 stk540 carbon steel pipe in China. Please feel free to buy high quality jis g3444 stk540 carbon steel pipe from our factory. Good service and reasonable price are available.
1. JIS Standard Introduction
Standard JIS G3444:2015 Steel Grade:STK540 Carbon Steel Pipes are utilized in Civil Engineering and Architectural Structures such as STEEL TOWERS, Footing Piles, Foundation Piles, Landslide Suppression Piles, Aairport Construction and so on.
This standard belongs to the Japanese Industrial Standard.
| Outside Diameter | 21.7-609.6mm |
| Wall Thickness | 2.0-22mm |
| HS Code | 730630 (FE can be issued) |
| Pipe Length |
3-18m acc to your requirements |
| Orgin | Made In China |
2. JIS G3444 STK540 Grade Symbol and Symbol of Manufacturing Method
| Symbol of Grade | Symbol of Manufacturing Method | Marking of Symbol of Manufacturing Method | |
|---|---|---|---|
| Tube manufacturing | Finishing method | ||
| STK540 | Seamless: S Electric resistance Butt welded: B Automatic arc welded: A |
Hot finished: H Cold finished: C As electric resistance welded: G |
As given in clause 11 b |
3. JIS G3444 STK540 Chemical Composition
| Symbol of Grade | C | Si | Mn | P | S |
|---|---|---|---|---|---|
| STK540 | 0.23 %max. | 0.55% max. | 1.50 %max. | 0.040 %max. | 0.040% max. |
| Notes a) If necessary, alloying elements other than specified in this table may be added. b) For the tube of grade STK540 exceeding 12.5 mm in wall thickness, the chemical composition may be subject to the agreement between the purchaser and the manufacturer. |
|||||
4. JIS G3444 Steel Grade STK 540 Mechanical Properties
| Symbol of Grade | Tensile Strength N/mm² | Yield Point of Proof Stress N/mm² | Tensile Strength in Weld Zone N/mm² | Flattening | Bendability | |
|---|---|---|---|---|---|---|
| Distance between Plates (H) | Bend Angle | Inside Radius | ||||
| Applied outside diameter | ||||||
| All outside diameters | All outside diameters | All outside diameters | All outside diameters | 50 mm max. | ||
| STK540 | 540 min. | 390 min. | 540 min. | 7/8 D | 90° | 6 D |
| NOTE 1 D of this table is the outside diameter of the tubes. NOTE 2 1 N/mm²-1 MPa Note a) Standard of bend angle shall be the start point of bending. | ||||||
Should you have any inquires,pls feel free to contact with us soon.
ELVA
MOB/WEHCAT/VIBER/WHATSAPP:+86 15122519420
E:elvazhao@lefinsteel.com
5.JIS G3444 Steel Grade STK540 Tensile Test Piece and the Minimum Value of Elongation
| Symbol of grade | Tube Manufacturing Method | ||||
|---|---|---|---|---|---|
| Seamless and butt welded | Electric resistance welded and automatic arc welded | All manufacturing methods | |||
| Applied outside diameter | |||||
| All outside diameters | 350 mm | Over 350 mm | All outside diameters | ||
| Test Piece and Direction of Test Piece | |||||
| No. 11 test piece No. 12 test piece | No. 11 test piece No. 12 test piece | No.5 test piece | No.4 test piece | ||
| Tube axis direction | Tube axis direction | Perpendicular to the tube axis direction | Tube axis direction | Perpendicular to the tube axis direction | |
| STK540 | 23 | 23 | 18 | 21 | 17 |
| For the tubes of outside diameter 40 mm or under, the elongation value in this table shall not be applied. However, the test result for these tubes shall be recorded. Further, the elongation may be specified by agreement between the manufacturer and the purchaser. | |||||
6. Dimensional Tolerances of JIS G3444 STK540
- Outside Diameter Tolerance a)
| Classification | Outside Diameter b) | Tolerances on Outside Diameter c) | Applicable Division |
|---|---|---|---|
| Class 1 | Under 50mm | ± 0.5mm | Applied when there is no specification. Applicable to hot-finished seamless steel tubes. |
| 50mm or Over | ± 1% | ||
| Class 2 | Under 50mm | ± 0.25mm | Applied when there is a specification. Not applicable to hot-finished seamless steel tubes. |
| 50mm or Over | ± 0.5% | ||
| Notes | a) For the local parts such as repaired parts if the wall thickness can be confirmed to be within the tolerance in the table below, the outside diameter tolerance of this table need not be applied. | ||
| b) The method for measuring the outside diameter of tubes exceeding 350mm in outside diameter may be determined by the circumferential length. The mutual conversion of outside diameter D and the circumferential length l shall be by the following formula: D = l / π Where D: outside diameter (mm) l: circumferential length (mm) π：3.1416 | |||
| c) The tolerances on the outside diameter of ends of electric resistance welded and automatic arc welded steel tubes exceeding 350mm in outside diameter shall be ±0.5%. | |||
7.Wall Thickness Tolerance a of JIS G3444 sTK 540
| Classification | For Seamless Steel Tube | For Other than Seamless Steel Tube | Applicable Division | ||
|---|---|---|---|---|---|
| Wall Thickness | Tolerance of Wall Thickness | Wall Thickness | Tolerance of Wall Thickness | ||
| Class 1 | Under 4mm | +0.6mm, -0.5mm | Under 4mm | +0.6mm, -0.5mm | Applied when there is no specification. Applicable to hot-finished seamless steel tubes. |
| 4mm or Over | +15%, -12.5% | 4mm or Over to and excl. 12mm | +15%, -12.5% | ||
| 12mm or Over | +15%, -1.5mm | ||||
| Class 2 | Under 3mm | ±0.3mm | Under 3mm | ± 0.3mm | Applied when there is a specification. Not applicable to hot-finished seamless steel tubes. |
| 3mm or Over | ±10% | 3mm or Over to and excl. 12mm | ±10% | ||
| 12mm or Over | +10%,-1.2mm | ||||
| Notes | a) The tolerances on the wall thickness of tubes exceeding 1016.0 mm in outside diameter may be agreed upon between the manufacturer and the purchaser. | ||||
7. Marking of JIS G3444 Steel Grade STK540 STEEL PIPES Made In China
Each tube having passed the inspection shall be marked with the following items on each STK540 tube. For tubes of smaller outside diameter or when there is a special request by the purchaser, marking may be applied on a bundle. The order of arrangement of the markings is not specified. When approved by the purchaser, part of the items may be omitted.
Grade symbol
Symbol representing the manufacturing process. The following symbol should be used to indicate the production technique. However, a space may be used in place of the dash.
As welded steel tube with electric resistance: -E-G
Hot finished electric resistance welded steel tube: -E-H
Cold finished electric resistance welded steel tube: -E-C
Butt welded steel tube: -B
Automatic arc welded steel tube: -A
Measurements Outside diameter and wall thickness should be noted for dimensions.
The manufacturer's name or an abbreviation of the manufacturer's name
Symbol representing the coating kind (in the case of using coated steel sheet or coated steel strip). The maker and purchaser shall agree on the symbol's abbreviation.
Manufacturer's name or its abbreviation
Symbol indicating the type of coating (in the case of using coated steel sheet or coated steel strip). Abbreviation of symbol shall be as agreed between the manufacturer and the purchaser.
Should you have any inquires,pls feel free to contact with us soon.
ELVA MOB/WEHCAT/VIBER/WHATSAPP:+86 15122519420 Email:elvazhao@lefinsteel.com
Related Description are as below,
JIS G3444 STK540 CARBON STEEL PIPES,JIS G3444 STK540 CARBON PIPES JIS G3444 STK540 ROUND STEEL PIPE
JIS G3444 STK540 CIRCULAR HOLLOW SECTIONS, JIS G3444 STK540 CARBON STEEL PIPE OD318.5MM
JIS G3444 STK540 CARBON STEEL PIPE OD 355.6MM,JIS G3444 STK540 CARBON STEEL PIPE 406.4MM
JIS G3444 STK540 CARBON STEEL PIPE 457.2MM JIS G3444 STK540 CARBON STEEL PIPE 508MM
JIS G3444 STK540 CARBON STEEL PIPE 609.6MM
JIS G3444 STK540 139.8X6mm Steel Tower Pipe,JIS G3444 STK540 139.8X6mm Steel Tower Pipe 165.2X6.0mm
JIS G3444 STK540 190.7X7mm ống thép cacbon,JIS G3444 STK540 216.3X8mm Carbon Tubular
JIS G3444 STK540 267.4X9mm Welded Steel Tower Pipe,JIS G3444 STK540 318.5X12mm ERW Steel Tower Pipe
JIS G3444 STK540 406.4x16mm LSAW Steel Tower Pipe,JIS G3444 STK540 406.4X19MM WELDED PIPE
JIS G3444 STK540 457.2x19mm LSAW Steel Tower Pipe,JIS G3444 STK540 500X14MM WELDED PIPE
JIS G3444 STK540 508x22mm LSAW Steel Tower Pipe,JIS G3444 STK540 558.8X16MM WELDED PIPE
JIS G3444 STK540 600x16mm LSAW Steel Tower Pipe,JIS G3444 STK540 609.6X14MM WELDED PIPE
JIS G3444 STK540 609.6X9MM STEEL TOWER PIPE,JIS G3444 STK540 609.6X12MM STEEL TOWER PIPE
JIS G3444 STK540 609.6X14MM STEEL TOWER PIPE,JIS G3444 STK540 609.6X16MM STEEL TOWER PIPE
JIS G3444 STK540 609.6X19MM STEEL TOWER PIPE,JIS G3444 STK540 609.6X22MM STEEL TOWER PIPE
China Steel Tower Pipe Manufacturer, China Steel Tower Pipe Factory, Steel Tower Made In China
Hot Tags: jis g3444 stk540 carbon steel pipe, China, suppliers, manufacturers, factory, price, API 5L LSAW Steel Pipe, STRUCTURE SAWL PIPE, API5L PSL2 LSAW STEEL PIPE, SAWL Pilling Pipe, ASTM A572 GR 50 LSAW PIPE, S355J2H LSAW Steel Pipe
