GALVANIZED SEAMLESS PIPE

Send Inquiry
GALVANIZED SEAMLESS PIPE
Details
The following is a comprehensive introduction to Galvanized Seamless pipes, covering their features, production processes, application fields, quality specifications and market prospects: I. Basic concepts and characteristics 1.Definition and Structure Galvanized seamless steel pipes are pipes...
Category
Hollow Section
Share to
Description

Tianjin Lefin Industrial Co., Ltd is one of the most experienced manufacturers and suppliers of galvanized seamless pipe in China. Please feel free to buy high quality galvanized seamless pipe from our factory. Good service and reasonable price are available.

 

The following is a comprehensive introduction to Galvanized Seamless pipes, covering their features, production processes, application fields, quality specifications and market prospects:

 

I. Basic concepts and characteristics


1.Definition and Structure

Galvanized seamless steel pipes are pipes in which a zinc-iron alloy layer is formed on the surface of seamless steel pipes through the hot-dip galvanizing process. Its core is made of carbon steel (such as Q195, Q215, Q235, Q345, etc.) , which combines the strength of seamless steel pipes with the anti-corrosion performance of galvanized layers.

 


2.Core characteristics

  • Strong corrosion resistance: The zinc layer isolates air, water and other media, extending the service life to more than 20 years ;
  • High strength and wear resistance: The base material is treated by rolling or cold drawing processes, and its compressive strength is increased several times. 
  • High-temperature adaptability: It can operate stably in high-temperature environments (such as heating systems, oil pipelines) and is not prone to deformation ;
  • Convenient construction: Smooth surface, easy to cut, weld and connect .

 

 

 

II. Production process


1.Key steps

Surface treatment: Pickling is carried out to remove the oxides and oil stains on the surface of the steel pipe to ensure the adhesion of the zinc layer ;

 

Hot-dip galvanizing

Temperature control: The temperature of the zinc liquid needs to be stabilized at 450-460°C;

Zinc immersion time: Adjust according to the thickness of the pipe wall (usually 1-5 minutes) to avoid missed plating or uneven zinc coating ;

 

Cooling and setting: Curing the zinc layer by water cooling or air cooling .


2.Process type

Hot-dip galvanizing method: Suitable for large-diameter pipes (outer diameter 21.3-610mm), with low cost and excellent anti-corrosion performance;

 

Cold plating method: Used for small-diameter precision tubes, with uniform and bright coating.


3.Specification for zinc coating thickness

 

Steel pipe wall thickness (mm) Minimum average zinc coating thickness (μm)
1.5 ≥45
1.5-3 ≥55
3-6 ≥70
≥6 ≥85


According to industry standards (such as ASTM A53).

 

 

III. Application fields


1.Architecture and Municipal Engineering

Structural supports (Bridges, stairs), underground drainage systems, roof drainage ;

Heating pipes (high-temperature resistance ≥100°C) .


2.Energy and Chemical Engineering

Oil/gas transmission pipelines (high-pressure environment, pressure grade ≥20MPa) ;

Chemical equipment (resistant to acid and alkali corrosion, such as acid washing tanks, reactor pipelines).


3.Mechanical manufacturing and transportation

Automobile chassis, exhaust system ;

Mining machinery supports, underground drainage pipes .

bs1139 scaffolding pipe

 

 

IV. Quality control and frequently asked questions

 

Reasons for Leakage Plating:

Residual oil stains or oxide scale on the surface;

Excessive iron content in the zinc liquid (>0.05%) or temperature fluctuations;

Improper immersion Angle leads to bubble retention .

 


Solution:

Enhanced pickling and sandblasting pretreatment ;

Regularly test the composition of the zinc liquid and control the impurity content .

 

 V. Specifications and markets


Common specifications:

Outer diameter: 10-720mm (commonly 21.3-610mm) 

Wall thickness: 1.5-75mm (e.g., the wall thickness of DN32 pipes is ≥2.5mm)

Length: Fixed length 4-12 meters (customizable).

 

galvanized steel pipes

 

VI. Conclusion

 

Galvanized seamless steel pipes, through the combination of seamless base pipes and zinc alloy coatings, have solved the problems of easy corrosion and insufficient pressure resistance of traditional welded pipes, and have become core materials in the fields of construction, energy and machinery. Its performance is highly dependent on technological accuracy

Hot Tags: galvanized seamless pipe, China, suppliers, manufacturers, factory, price, JIS G3466 Square And Rectangular Tubes, Rectangular Box Section, Hollow Steel Section, Thailand Square Pipe, INDONESIA ASTM A500 HOLLOW SECTION, HDPG PIPE

Send Inquiry