AS3679 STEEL PIPES

Tianjin Lefin Industrial Co., Ltd is one of the most experienced manufacturers and suppliers of as3679 steel pipes in China. Please feel free to buy high quality as3679 steel pipes from our factory. Good service and reasonable price are available.

AS3679 is a specification for hot-rolled steel for structural use in Australian standards, covering various types of steel, including steel plates, sections, bars and steel pipes. This standard specifies technical requirements such as the chemical composition, mechanical properties, and dimensional tolerances of steel, and is applicable to structural applications in fields such as construction, Bridges, and mechanical manufacturing. The following are the key information of AS3679 steel pipe:

AS3679 classifies structural steel into multiple strength grades. Common steel pipe grades include:

• AS3679-250: Tensile strength of 250 MPa grade, with good plasticity and weldability, suitable for general structures.

• AS3679-300: Tensile strength of 300 MPa grade, medium strength, widely used in building frames and support structures.

• AS3679-350: Tensile strength of 350 MPa grade, high strength and good weather resistance, suitable for heavy-duty or open-air environments.

The specific requirements for each level include:
• Chemical composition: Content limits of elements such as carbon (C), manganese (Mn), sulfur (S), and phosphorus (P).

• Mechanical properties: yield strength, tensile strength, elongation, etc. (For example, the yield strength of AS3679-350 is ≥350 MPa).

• Construction engineering: Used for steel structure frames, roof trusses, columns, etc.

• Bridge engineering: Manufacturing load-bearing components such as bridge piers and support beams.

• Mechanical manufacturing: As a supporting structure or transmission component for mechanical equipment.

• Infrastructure: Pipe supports, transmission towers, etc.

• Weldability: The AS/NZS 1554 welding standard must be followed, and matching welding materials and processes should be selected.

• Cutting and forming: Cold bending, hot bending and other processes can be adopted. It is necessary to pay attention to avoiding material embrittlement.

• Surface treatment: Usually, coating or hot-dip galvanizing (such AS AS/NZS 4680) is required to enhance corrosion resistance.

• Comparison with ASTM: AS3679-350 is similar to ASTM A572 Grade 50, but there may be differences in chemical composition and testing methods.

• Compared with the EN standard: AS3679-350 is close to the S355 steel of the European standard EN 10025-2, but attention should be paid to the certification and regional specification requirements.

• Load conditions: For high dynamic loads or shock environments, it is recommended to choose AS3679-350.

• Environmental factors: Surface protection treatment is required in damp or corrosive environments.

• Economy: The AS3679-250 has a relatively low cost and is suitable for non-critical structural components.

• Certification Requirements: When purchasing, it is necessary to confirm that the steel complies with the AS3679 standard and provide a material certification (MTC).

• Dimensional tolerance: The allowable deviations for outer diameter, wall thickness, etc. as stipulated in AS3679 should be referred to.

AS3679 steel pipes are widely used in engineering projects in Australia and internationally due to their high strength and mature technology. When making a specific selection, it is recommended to conduct a comprehensive assessment in combination with engineering design requirements, local standards and environmental conditions.